module 3 of 8
FRC designers rarely model COTS parts from scratch. This module covers the parts libraries and custom features that let you drop in real components and automate repetitive FRC modeling tasks.
Vendor Libraries (FRCDesignLib) and FeatureScripts is module 3 of 8 in the CAD & Design guide. It picks up where Onshape Fundamentals: Sketches, Parts, and Assemblies left off and hands over to Manufacturability, Drawings, BOMs, and Design Reviews. Its 3 lessons are about 100 minutes of the guide's ~18 hours.
what is behind this tab
you can read them out of order, nothing is locked
| no. | module | lessons |
|---|---|---|
| pre | CAD Foundations: Spatial Thinking and Drawings | 3 |
| 01 | Getting Started: CAD Software and the Design Process | 3 |
| 02 | Onshape Fundamentals: Sketches, Parts, and Assemblies | 4 |
| 03 | Vendor Libraries (FRCDesignLib) and FeatureScriptsyou are here | 3 |
| 04 | Manufacturability, Drawings, BOMs, and Design Reviews | 4 |
| 05 | Worked Examples & Mini-Projects | 4 |
| 06 | Common Mistakes & Troubleshooting | 5 |
| 07 | Advanced Techniques & Case Studies | 5 |