module 2 of 8
This module teaches the core Onshape skills every FRC designer needs: navigating Part Studios, sketching, creating features, building assemblies, and mating parts together. These skills transfer to any CAD package.
Onshape Fundamentals: Sketches, Parts, and Assemblies is module 2 of 8 in the CAD & Design guide. It picks up where Getting Started: CAD Software and the Design Process left off and hands over to Vendor Libraries (FRCDesignLib) and FeatureScripts. Its 4 lessons are about 155 minutes of the guide's ~18 hours.
what is behind this tab
you can read them out of order, nothing is locked
words this module uses without explaining
when it breaks, not how it works
| no. | module | lessons |
|---|---|---|
| pre | CAD Foundations: Spatial Thinking and Drawings | 3 |
| 01 | Getting Started: CAD Software and the Design Process | 3 |
| 02 | Onshape Fundamentals: Sketches, Parts, and Assembliesyou are here | 4 |
| 03 | Vendor Libraries (FRCDesignLib) and FeatureScripts | 3 |
| 04 | Manufacturability, Drawings, BOMs, and Design Reviews | 4 |
| 05 | Worked Examples & Mini-Projects | 4 |
| 06 | Common Mistakes & Troubleshooting | 5 |
| 07 | Advanced Techniques & Case Studies | 5 |