Common Safety Mistakes & Troubleshooting
Real pitfalls, the symptoms that reveal them, and the debugging workflow to fix them - at the bench, in the pit, and in code. This module catalogs the mistakes that actually injure FRC teams and tank inspections: brownouts from undersized wiring and missing current limits, battery handling errors, electrical-isolation failures inspectors fail you for, stored-energy surprises during pit work, and the pit-conduct findings (daisy-chained strips, missing glasses) a UL Safety Advisor flags. Each lesson pairs the mistake with a concrete diagnostic procedure and a verified fix using real part numbers and real rule numbers.
Common Safety Mistakes & Troubleshooting is module 6 of 7 in the Safety guide. It picks up where Safety Worked Examples & Mini-Projects left off and hands over to Advanced Safety Engineering & Case Studies. Its 5 lessons are about 110 minutes of the guide's ~10 hours.
In this module
5 lessons
Not the one you wanted?
10 other departments use this module name
This is the Safety one — 5 lessons, about 110 minutes. The departments below run a module by the same name over completely different material.
Longer reads
Articles that go deeper on this
All 7 modules in Safety
Department overview- 01Foundations: A Culture of Safety and the People Who Lead It3
- 02PPE and Shop Safety3
- 03Battery, Pneumatics, and Electrical Safety4
- 04Events, Robot Handling, and Your Team Safety Program3
- 05Safety Worked Examples & Mini-Projects5
- 06Common Safety Mistakes & Troubleshooting5
- 07Advanced Safety Engineering & Case Studies5