Mechanical, Build & PneumaticsModule 8 of 12

Safety, Rules, and Testing

The non-negotiable part: the FIRST legality rules, the mandatory required components, and the operational tests that keep your system safe and pass inspection.

Safety, Rules, and Testing is module 8 of 12 in the Mechanical, Build & Pneumatics guide. It picks up where Building, Wiring, and Programming a Pneumatic System left off and hands over to Worked Examples & Mini-Projects. Its 3 lessons are about 70 minutes of the guide's ~21 hours.

3 lessons~70 min47 lessons in this guide

Start with lesson 1 All of Mechanical, Build & Pneumatics

In this module

3 lessons

01The Pneumatics Rules: 120 psi, 60 psi, and What's LegalThe core FRC pneumatic rules every team must follow, including the pressure limits, the COTS requirement, and the list of permitted devices.24 min read

02Required Components and Passing InspectionThe exact components inspectors require on any pneumatic robot, and how to be ready for inspection day.22 min read

03Operational Testing: Relief Valve, Pressure Switch, and LeaksThe safety and reliability tests from the official Pneumatics Manual: confirm the switch shuts off the compressor, validate the relief valve, and hunt down leaks.24 min read

Previous moduleBuilding, Wiring, and Programming a Pneumatic System

Next moduleWorked Examples & Mini-Projects

Jargon check

FRC terms used in Safety, Rules, and Testing

InspectionThe required check that a robot meets size, weight, safety, and rules before it can compete.

Longer reads

Articles that go deeper on this

FRC Pneumatics: How to Design, Wire, and Program a Pneumatic SystemComplete FRC pneumatics guide: components, the REV Pneumatic Hub vs PCM, single vs double solenoids, safe wiring, WPILib programming, and the 60/120 psi limits.9 min read

All 12 modules in Mechanical, Build & Pneumatics

Department overview