module 3 of 12
A robot is only as good as the frame and joints holding it together. This module covers what robots are made of and how the pieces attach.
Structure, Materials, and Fasteners is module 3 of 12 in the Mechanical, Build & Pneumatics guide. It picks up where Power Transmission and Gear Ratios left off and hands over to Mechanisms, Fabrication, and Assembly. Its 3 lessons are about 100 minutes of the guide's ~21 hours.
what is behind this tab
you can read them out of order, nothing is locked
| no. | module | lessons |
|---|---|---|
| pre | Engineering Foundations: Forces, Torque, and Machines | 4 |
| 01 | Drivetrains: Moving the Robot | 4 |
| 02 | Power Transmission and Gear Ratios | 4 |
| 03 | Structure, Materials, and Fastenersyou are here | 3 |
| 04 | Mechanisms, Fabrication, and Assembly | 3 |
| 05 | Pneumatics Fundamentals: How Air Becomes Motion | 3 |
| 06 | The Components: Controllers, Compressor, Valves, and Cylinders | 4 |
| 07 | Building, Wiring, and Programming a Pneumatic System | 4 |
| 08 | Safety, Rules, and Testing | 3 |
| 09 | Worked Examples & Mini-Projects | 5 |
| 10 | Common Mistakes & Troubleshooting | 5 |
| 11 | Advanced Techniques & Case Studies | 5 |